Retra UWT recently introduced three new, fourth-generation versions of their popular underwater flash called the Pro Max, Prime +, and Pure.
At a glance, this new generation of underwater strobes looks similar to their original model Retra Flash. They retain the aluminum alloy housing that's made to withstand depths up to 100 meters that was first introduced in their original model Retra Flash. They also feature the same bayonet mount with a locking mechanism incorporated in the front that attaches to all existing Retra accessories such as their Light Shaping Device (LSD) and lighting reduction ring. Beyond that, the three newer models differ in a few areas.
Power Output and Battery Status
The top-of-the-line Pro Max now generates a maximum illumination of 140 Watt-seconds as opposed to previous Pro X model’s 150 Watt-second (Ws) rating. I see this 10Ws drop in maximum power as a more realistic representation of what their specially designed circular flash tubes can produce.
In place of the single LED indicator light between the dials, the new Pro Max uses an OLED display pane that provides information on battery status, mode, and power level as a recycle indicator. All are all displayed (not at once) in numeric fashion, which gives you much more at-a-glance information.
Retra has never previously provided any type of illumination feature on their power level dial, making it nearly impossible see and identify the strobe settings in situations such as night diving. With the new OLED display, the same numeric setting that the dial is positioned on is displayed in the window. Certainly a feature I will welcome on a blackwater dive.
Meanwhile, the new Prime + and Pure models will continue to use the LED indicator light that uses different colors to indicate battery status (green for full, yellow for half, red for low), as well as the selected mode setting (i.e. magenta for manual, cyan for TTL, etc.).
On the outside, the new Prime+ and Pure look the same as the Pro Max — minus the OLED panel. The Prime + is their midlevel model with all the same features as the Pro Max, except its max output at full power is 90Ws.
The Pure, with a max output at full power of 70Ws is regarded as Retra’s entry level model. The only other difference between it and the Prime + is that it is not fitted with company's built-in water leakage detection for water entry into the battery compartment and does not have High Speed Sync (HSS) functionality.
New Electronics, Better Battery Boost
Retra says this latest generation of strobes feature a “completely redesigned” set of electronics that require less power for the same light output. Retra also says that the optical triggering system is now more reliable even when using “sub-optimal fiber optic cables” connected to the flash.
For wide angle photography, I am a big fan of the quality of light produced by Retra’s unique fully circular flashtube. Read my review on the 2nd generation Retra Prime Flash here.
At the time I did that review I felt the Pro model with a rated 150 Ws output at full power wasn’t given the proper power supply it deserved; it’s like having a car with a V-8 engine but with a fuel tank intended for a subcompact.
Retra’s workaround to this was an add-on module called a Supercharger that held an additional four AA’s. While I will admit the Supercharger does achieve its goal, nearly doubling the number of flashes with a slightly shorter recycle time, I still felt it was a wonky solution due to the way it protruded behind the strobe. I would have preferred that Retra design that battery compartment from the start to hold eight AA’s instead of four, which would make more sense for a pro level model strobe.
This time around Retra has done just that by first making the strobe housing slightly longer and redesigning the battery compartment with a raised lip that puts the O-rings on the outside. This changer makes it likely for water droplets to get down inside the case when the battery door is removed. What makes this design even more appealing is that the user can choose between using the strobe with four rechargeable AA’s or eight AA batteries by means of an optional “Booster” battery door.
Rather than being another battery module you add onto the strobe, the Booster is essentially a taller version of the battery door that comes standard that allows an addition four AA’s to be stacked on top of the first four. While it still creates a significant protrusion off the back the strobe housing it’s certainly less obnoxious looking than the former Supercharger. The best part to this redesign is that it provides an easier, cleaner way to load and unload those eight batteries.
Even Lighting
One more new feature you may not notice is that the glass dome in front of the circular flash tube on the Pro Max, Prime + and Pure has changed from totally clear to a frosted surface. According to Retra, this change improves the illumination from the flashtube by creating a more evenly distributed light spread. This is expected to enhance the strobe's capabilities in a variety of conditions.
As mentioned earlier I am big fan of the quality of light produced by these strobes for wide angle photography. Their fully circular flash tube design allows me to forgo using a diffuser most the time. Can’t wait to see what these new strobes will do in the water. But that may not happen till around Sept/Oct 2023, which is the estimated shipping date from Retra UWT.
The price point through retailers for the Flash Pro Max is $1,575 with the Flash Prime+ at $1,250 and Flash Pure are priced at $1,025 (all USD). The Booster battery cap option is priced around $185 USD.